67-500-1 – Power Box Fan & Inverter (1ph in/3ph out) – PB500140 – Flakt Woods
GENERAL INFORMATION:
Airflow rate up to 4.7 m³/s
Static pressure up to 1100 Pa
High efficiency motor.
Box sizes (side lengths): 500, 670, 800 mm
All aluminium Pentapost frame and corner design provides a sturdy and robust structure.
Highly efficient, low-noise backward curved centrifugal impeller. Rugged aluminium construction withstands harsh operation and high temperature.
Capable of handling air temperatures up to 50°C.
Thermally insulated double skinned galvanised steel panels reduce breakout noise to a minimum.
Perpendicular (90°) discharge options in all vertical and horizontal directions. Can be quickly reconfigured to provide an inline outlet flow.
Quick and easy to maintain.
CONSTRUCTION:
The casing is made from pre-galvanised sheet steel BS EN 10346: 2009 DX 51D + Z 275G/M2 with double chambered aluminium supporting frames and corners. The thermal insulation is achieved using glass fibre sheets. The unit can be mounted vertically or horizontally and has removable side panels.
IMPELLER:
The unit is equipped with a highly efficient, low-noise backward curved centrifugal impeller. Its rugged aluminium construction withstands harsh operation and high temperature and is dynamically balanced to ISO 21940-11 grade G6.3.
SPEED CONTROLLER:
The units are operated and controlled using Woods supplied speed control drives. Most three phase units can also be operated at full speed via direct on line connection, with the exception of the 630 size and single phase range.
ELECTRICAL SUPPLY:
220-240V/50Hz/1PH and 380-420V/50Hz/3PH
TEMPERATURE RANGE:
Up to 50°C
INLET SPIGOT SIZES:
315, 355, 400, 450, 500, 560, 630 mm
MOTOR:
The units are equipped with direct drive high efficiency motors with ingress protection to IP55.
PRODUCT CODE:
POWERBOX3
AA BBB – C
POWERBOX3 Fan name
AA Box size (67, 80 cm, etc.)
BBB Spigot diameter (500, 560 mm, etc.)
C Phase (1 or 3)
AVAILABLE ACCESSORIES:
Mounting tracks complete with A/V mounts
Square to round transformation
Flexible connectors
Inverters
Inlet spigot (available via our distribution partners)
Weather roof
PRODUCT PDF:
GBW EC 400 A - Helios - GigaBox EC Centrifugal Fan
018-150 - DAMPER - 150mm - Elta
RVMD 315/24V - Motorised duct shutter - Helios
039-SFSV-63/71 Backdraught Shutters - Elta
FSD 160 - Helios - Flexible Circular Attenuator
RSK 160 - Helios - Back Draught Shutter
068-0100-JF1 - 100dia - 300mm Long - Spigot Silencer - Elta
GBW 315/4 - 1PH GigaBox Fan - Helios
GBD 355/4/4 T120 - 3PH GigaBox Centrifugal Fan - Helios
RR 150C - Centrifugal Inline Fan - Helios
GBD EC 450 - EC Centrifugal Fan - 3 Phase - Helios
KSE-45 - AV Mounts (Set Of 4) - Soler & Palau
TH-1300/250 - TH-MIXVENT - Roof Mounted Mixed Flow Fan - Soler & Palau
VR 400 - Helios - Extension Flanged Casing
SB EC 355 - Helios - SilentBox Acoustic Line EC - Centrifugal In-line Fan
RDW 225/4 - Helios - Centrifugal Roof Fan - Horizontal Discharge
018-500-CLAMP - 500mm - Fast Clamps - Elta
062-SEL03 Box Fan AV Mounts - Elta
VARD 400/2/2 - Helios - Cased Mixed Flow Fan
ACOPEL F400-630 N - Flexible Connector - Soler & Palau
GVI-001 - Gas Valve Interlock Control Panel - Cadamp
HPA500/4-1A - Elta - Plate Mounted Axial Flow Fan
TCBT/4-450/H - *230/400V 50* - Compact Cased Axial Fan - Soler & Palau
LFBR 100 F7 - Helios - In-line Air Filter Box
GBD EC 710 T120 - Giga box centrifugal EC fan - 3 PH - Helios
LFBR 250 G4 - Helios - In-line Air Filter Box
REV 5N - Transformer Speed Controller - Soler & Palau
018-0400-FILT-P - Panel Filter 400mm Spigots - Elta
16163 - CA 150 MD E - 150mm Diameter Centrifugal Metal In-Line Fan - Vortice
068-0500-2DEP - 500mm - Flanged Silencer - Elta
SWC45/50 - Wall Cowl - Elta
ELF-ELS - Replacement air filter - Helios
Terlok - Ring Leader Air Valve Fixing Ring - 200mm
Multiflow SEL560/4-1AC - Elta - Mixed Flow Fan
RVM 710 - Back draught shutter - Helios
DEF-450 D - Wire Protection Guards Outlet - Soler & Palau
MV 100 B - Helios - MixFlowVent Centrifugal Fan 
