50-315-1 – Power Box Fan & Inverter (1ph in/3ph out) – PB315140 – Flakt Woods
GENERAL INFORMATION:
Airflow rate up to 4.7 m³/s
Static pressure up to 1100 Pa
High efficiency motor.
Box sizes (side lengths): 500, 670, 800 mm
All aluminium Pentapost frame and corner design provides a sturdy and robust structure.
Highly efficient, low-noise backward curved centrifugal impeller. Rugged aluminium construction withstands harsh operation and high temperature.
Capable of handling air temperatures up to 50°C.
Thermally insulated double skinned galvanised steel panels reduce breakout noise to a minimum.
Perpendicular (90°) discharge options in all vertical and horizontal directions. Can be quickly reconfigured to provide an inline outlet flow.
Quick and easy to maintain.
CONSTRUCTION:
The casing is made from pre-galvanised sheet steel BS EN 10346: 2009 DX 51D + Z 275G/M2 with double chambered aluminium supporting frames and corners. The thermal insulation is achieved using glass fibre sheets. The unit can be mounted vertically or horizontally and has removable side panels.
IMPELLER:
The unit is equipped with a highly efficient, low-noise backward curved centrifugal impeller. Its rugged aluminium construction withstands harsh operation and high temperature and is dynamically balanced to ISO 21940-11 grade G6.3.
SPEED CONTROLLER:
The units are operated and controlled using Woods supplied speed control drives. Most three phase units can also be operated at full speed via direct on line connection, with the exception of the 630 size and single phase range.
ELECTRICAL SUPPLY:
220-240V/50Hz/1PH and 380-420V/50Hz/3PH
TEMPERATURE RANGE:
Up to 50°C
INLET SPIGOT SIZES:
315, 355, 400, 450, 500, 560, 630 mm
MOTOR:
The units are equipped with direct drive high efficiency motors with ingress protection to IP55.
PRODUCT CODE:
POWERBOX3
AA BBB – C
POWERBOX3 Fan name
AA Box size (67, 80 cm, etc.)
BBB Spigot diameter (500, 560 mm, etc.)
C Phase (1 or 3)
AVAILABLE ACCESSORIES:
Mounting tracks complete with A/V mounts
Square to round transformation
Flexible connectors
Inverters
Inlet spigot (available via our distribution partners)
Weather roof
PRODUCT PDF:
149-DCV-H1 - Room Humidistat - Elta
SB 250 E - SilentBox Centrifugal Fan - Helios
Quick-Fit Reducer - 500mm Main Duct - Galvanised - Nordfab
Roof Cravat - 250mm Diameter
ELS-GAPB - Surface mounted casing - Helios
068-0500-JF1 - 500dia - 300mm Long - Spigot Silencer - Elta
MVB OPERATING SWITCH - HELIOS
LFBR 200 G4 - Helios - In-line Air Filter Box
MBD 355/4/4 - Helios - MegaBox Centrifugal Fan
ACOPEL F400-315 N - Flexible Connector - Soler & Palau
RVM 225 - Helios - Back Draught Shutter
144622 - DVNI 450 D4 F4 30 - Roof fan insulated flue gas discharge - Ruck
VEKA INT 400/5.0 - L1 EKO - Air handling unit - Helios
CVAT/4-6000/500 ND - Centrifugal Acoustic Kitchen Extract + Variable Frequency Inverter (Pack 6) - Soler & Palau
149-TC116 (16AMP) - Transformer Controller - Elta
137588 - EM 150 E2 01 - 150mm Inline Tube Fan - Ruck
MTP 30 - 143289 - 3 - step potentiometer 10 kO - Ruck
WHR 250 - Helios - Water Heater Battery For Circular Ducting
TCBTx2/4-630 - Contra-Rotating Axial Flow Fan - Soler & Palau
HRFD 250/2 EX - Helios - Cased Axial Fan - Low Pressure
068-0315-1DEP - 315mm - Flanged Silencer - Elta
149-TC33 (3amp) Three Phase - Transformer Controller - Elta
RVK 400 - Helios - Manual Grille
REV 7N - Transformer Speed Controller - Soler & Palau
SDD 1 - Helios - Anti Vibration Mounts (4 pcs.)
Multiflow SMB650/4-3AC - Elta - Mixed Flow Box Fan
TD-6000/400 TRIF - TD-MIXVENT In-line Mixed Flow Duct Fan - Soler & Palau
TSW 1.5 - Helios - Transformer Controller
SVR 160 K - Helios - SlimVent - Slim Centrifugal Fan Box - Backward Curved
SKRW 400/4/70/40 - Acoustic Swing Out Centrifugal Fan 1Ph - Helios 
